Tilta Camera Cage for Sony FX2 Pro Kit - Titanium Gray

Tilta Full Camera Cage for Sony FX2 (Titanium Gray)

Add protection and accessories to your Sony FX2 digital cinema camera with this lightweight and modular Full Camera Cage from Tilta. This modular, formfitting full cage features numerous mounting options as well as an integrated side grip and a removable, bidirectional bottom plate that provides horizontal and vertical mounting options. The aluminum cage maintains access to the camera's controls and functions.

Mount a variety of accessories using the integrated NATO rail, shoe mount, and the 3/8"-16 and 1/4"-20 threads with anti-twist locating points. The removable base features an integrated DJI/Arca-standard plate for quick mounting onto tripod heads and DJI-style gimbal mounts. It also includes an HDMI cable clamp and a USB-C/Multi clamp to protect your cables from pulling.

Tilta Xeno Top Handle with NATO Clamp (Titanium Gray)

Integrate this titanium gray Tilta Xeno Top Handle into your camera cage configuration for improved low-angle shooting. The top handle secures to your cage via a NATO clamp. Multiple 1/4"-20 and 3/8"-16 threads throughout the handle allow you to attach articulating arms, cable clamps, or other accessories. A single cold shoe slot accommodates a shotgun microphone or wireless transmitter. The handle's silicone grip makes for an ergonomic and anti-slip handgrip.

Tilta Height-Adjustable Arca-Type 15mm LWS Baseplate (Titanium Gray)

This Height-Adjustable Arca-Type 15mm LWS Baseplate from Tilta features a 15mm LWS rod clamp baseplate to accommodate standard 15mm rods, and a quick release top plate is included for integration with Arca-type tripod systems. The system is height adjustable within a 0.78" range to accommodate a follow focus system or matte box, and it features a range of 0.71 to 1.5" from the rod center to the Arca receiver.

A dovetail clamp on the base is compatible with Tilta dovetail plates, and there are also 1/4"-20 threads on the bottom for mounting onto a tripod, plate, or rig. The Arca-type quick release plate features a 1/4"-20 screw to secure your camera. The baseplate can support a camera rig load weighing up to 10 lb.

Tilta Advanced Left-Side Handle Adapter Type VI (Gold)

The Advanced Left-Side Handle Adapter Type VI from Tilta enables you to mount a Tiltaing Left-Side Wooden Handle to the NATO rail mount on select Tilting camera cages. This gold Type VI adapter is constructed of aluminum and stainless steel and comes with an Allen key.

Tilta Left-Side Advanced Power Handle with Run/Stop (F570, Tilta Gray)

The Tilta Left-Side Advanced Power Handle, in Tilta gray, attaches to the left side of Tiltaing camera cages using your choice of an optional rail/rosette mounting bracket—Tilta Left-Side Adapter Type IV, V, or VI. The handle accepts a Sony F570 battery (sold separately) and features two power outputs for running accessories off the battery. It offers an 8V USB Type-C output port and 12 VDC port. In addition to this, the Advanced Power Handle provides a run/stop button for controlling record start/stop on compatible cameras over an optional R/S cable connection.

Tilta Threaded 15mm Rod (Black, 8", Single)

Tilta's 8" Threaded 15mm Rod is a 8" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.

The rod is made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.

• Lightweight anodized aluminum construction
• The chamfered end eases mounting of rod-based accessories
• Both ends are threaded for extending the length of the rod