Sennheiser MKE 1-ew
by SennheiserMiniature 3.5mm Capsule, Omnidirectional Polar Pattern, EW Series 1/8" (3.5mm) Connection, MZQ222 Mic Clip Included
- Obročno plaćanje Obročno kartično plaćanje bez kamata 2-12 rata putem Visa Classic kartica u izdanju UniCredit Bank. Ostale načine plaćanje provjerite na linku: Načini plaćanja.
- Brza dostava Za sve narudžbe unutar BiH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana. Više detalja provjerite na linku Načini dostave.
- Kontakt Mail: info@aviteh.ba - Telefon: 033 24 67 67 - Adresa poslovnice: Malta 29, Sarajevo
Sadržaj pakovanja
- Sennheiser MKE1 - Professional Lavalier Microphone for EW Series Wireless (Black)
- MKE 1 Clip-on Microphone
- MZQ222 Clip
- Pouch
- MZC 1-1 Small Frequency Response Cap
- MZC 1-2 Large Frequency Response Cap
- Make-up Protection Caps
- 1 Year Warranty
The Sennheiser MKE1 Miniature Lavalier Microphone is their smallest, professional lavalier microphone to date. Measuring just 3.5mm (0.13") in diameter, the MKE1 is well suited for placement in hair, the body, clothing, accessories, props, etc.
Audio signal is reproduced transparently, while maximum intelligibility of speech and vocals is achieved with its omnidirectional polar pattern and wide frequency response.
The Kevlar reinforced cable is rugged and minimizes surface noise. The MKE1's moisture resistant enclosure protects against damage caused by moisture, making it well suited for actors, performers and broadcast applications.
- 1/8" (3.5mm) connection for Sennheiser EW series wireless transmitters
- Great strengths - small microphone
- Very small dimensions (3.3mm capsule diameter)
- High maximum sound pressure level (142dB)
- Very high speech intelligibility; clear, pleasant treble
- Full, natural sound with low ambient noise
- Thin (1mm diameter) and robust cable; flexible with minimum handling noise
- Very sweat-resistant due to protective membrane
- Flexible tubes for attaching the microphone with clips or adhesive tape
| Transducer | Condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 20Hz to 20kHz +/- 2.5dB |
| Dynamic Range (Typical) | Not Specified By Manufacturer |
| Signal-to-Noise Ratio | 27dB 39dB (weighted as per CCIR 468-3) |
| Maximum Input Sound Level | 142dB |
| Power Requirements | 4.5 - 15V |
| Output Impedance | 1k Ohm (Nominal) 4.7k Ohm (Min. Terminating) |
| Output Connectors | 1/8" (3.5mm) for EW Series Wireless Transmitters |
| Pad | No |
| Low Frequency Roll-Off | No |
| Dimensions | 0.13" (3.5mm) Diameter |
| Weight | 0.1g |