Sennheiser e 902
by SennheiserDynamic cardioid bass instrument microphone with integral stand mount. Designed for deep frequencies such as kick drums, bass guitar amps, and tuba. Dampens mid-range to accentuate high-end and bass. Rugged housing.
- Obročno plaćanje Obročno kartično plaćanje bez kamata 2-12 rata putem Visa Classic kartica u izdanju UniCredit Bank. Ostale načine plaćanje provjerite na linku: Načini plaćanja.
- Brza dostava Za sve narudžbe unutar BiH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana. Više detalja provjerite na linku Načini dostave.
- Kontakt Mail: info@aviteh.ba - Telefon: 033 24 67 67 - Adresa poslovnice: Malta 29, Sarajevo
Sadržaj pakovanja
- e 902 microphone
- Pouch
- User Manual
Primarily designed for capturing kick drums and bass guitar cabinets, the Sennheiser E902 excels in reproducing low frequency instruments with incredible richness and detail. The E902 features a dynamic element with a cardioid polar pattern. The dynamic element provides high headroom and low distortion when capturing signals at excessive sound pressure levels. The E902 responds to very fast attacks with extreme accuracy, without distortion. Low frequency response is optimized allowing the E902 to excel in reproducing kick drum, bass amplifiers, acoustic bass, tuba, timpani and much more.
- Low Frequency Response
- The low frequency response is optimized for accurate reproduction of kick drum, bass guitar cabinets, acoustic bass, tuba, etc.
- Fast Transient Response
- The E902 is capable of withstanding high sound pressure levels and fast attacks are reproduced accurately without distortion.
- Cardioid Polar Pattern
- The cardioid polar pattern is effective in minimizing off-axis audio and residual noise that may cause feedback.
- Hum Compensation
- The built-in hum compensation coil suppresses hum and low frequency noise.
- Rugged Construction
- The rugged, durable construction is capable of handling life on the road or in studio.
| Transducer | Dynamic |
| Polar Pattern | Cardioid |
| Frequency Response | 40Hz to 16kHz |
| Dynamic Range (Typical) | not specified by manufacturer |
| Signal-to-Noise Ratio | not specified by manufacturer |
| Maximum Input Sound Level | not specified by manufacturer |
| Power Requirements | None, dynamic element |
| Output Impedance | Nominal (@ 1kHz): 350 ohms Min. terminating: 1k ohms |
| Output Connectors | 3-pin XLR male |
| Pad | No |
| Low Frequency Roll-Off | No |
| Dimensions | 5.06 x 2.36" (128.5 x 60mm) (Length x Diameter) |
| Weight | 15.52 oz (440 g) |