Godox IT32 O TTL On-camera Mini Flash for Panasonic

• The iT32 will automatically identify the attached separately available X5 version
• A battery level indicator lets you monitor the remaining battery level
• Guide number of 59' at ISO 100
• Flash durations from 1/1000 to 1/30,000 sec
• Power on/off switch
• Power 1/128 to 1/1 with +/-1/3 increments
• FEC from -3.0 to +3.0 with +/-1/3 increments
• S1/S2 settings
• Stroboscopic flash mode: fires up to 100 times with an output range from 1/128 to 1/4
• TCM conversion in Wi-Off mode
• Standby and auto off settings
• Global shutter sync shooting and radio wireless global shutter sync settings only available when using the iT32 with the optional X5S model
• Certain features such as HSS support and second-curtain sync limited depending on the camera model
• Over-temperature protection
• Also compatible with the optional X2T, XPro II, X3 series of triggers and Godox's MA02 magnetic accessory kit

Godox X5 O TTL Hotshoe Flash Trigger

The dynamic X5O TTL Wireless Flash Trigger from Godox works seamlessly with the brand's separately available iT32 mini flash by adding a hot shoe connection and flash triggering capability. This version, the X5O, features a hot shoe compatible with select Olympus and Panasonic cameras. By simply aligning the X5O with the bottom of your iT32, the flash will automatically absorb it for easy attachment. After this step, rotate the locking ring of the flash trigger to properly insert the X5O into the hot shoe mount of your compatible camera. To complete, rotate the locking ring until it's locked for secure connection.

Compatible Camera Models

Use the X5O with the separately available iT32 mini flash for compatibility with these Olympus and Panasonic camera models: E-M1, PEN-F, E-M10 Il, E-PL8, E-P5, E-M10 IlI, GH4, LX100, DMC-GF1, DMC-G85, DMC-GX85, DMC-LX100, DMCFZ2500GK, and S1.

Flexibility

When the separately available iT32 and the X5O are used together (iT32+X5 setting), the X5O is also capable of sync triggering other Godox flashes. As a sender unit with the optional iT32, the X5O is able to control various receiver units that are a part of Godox's wireless X system, such as AD100Pro II, AD200Pro II, AD600Pro II, AD600BM II, iT30Pro, V100, V480, and Lux Master models.

Additional Details

Please note: The X5O does not have power on/off function, but color indicators. Users can attach the X5O to the separately available iT32 and access the menu to check the battery level of the flash trigger. The X5O has an internal 3.8V, 100mAh lithium battery. It takes approximately three hours to fully charge the X5O after connecting it to your iT32, and about 16 hours to discharge from full battery level.